The plastic in the plastic extruder machine is melted under the heating of the electric heating tube, and the solid plastic is transformed into a uniform melt under the extrusion and shearing action of the screw. The raw material enters the plastic recycling extruder through the hopper above the machine, and there is a feeding screw in the hopper, which can transport the material evenly into the plastic recycling extruder machine. The feeding speed can be controlled by controlling the speed of the geared motor above the machine.
model: | PM-LJ180 |
Aspect ratio | 33:1 |
Screw diameter | 180mm |
barrel length | 5940mm |
main motor power | 110 kw |
Host speed control device | 75KW |