- How To Make A Good Molded Pallet From Reeds -

Reed is an aquatic plant that grows by the lake. It can not only beautify the landscape along the lake, but also absorb nutrient-rich substances in the water to purify the water. The nitrogen and phosphorus will return to the water body after it withers, deepening the degree of eutrophication, creating favorable conditions for the growth of blue-green algae, and further bringing hidden dangers to water quality. How to recycle the harvested reeds has become a difficult problem. Factories will use reeds as raw materials for papermaking, etc., but with social and economic development and industrial upgrading and transformation, these traditional utilization methods are gradually disappearing. There is no good place to go after the reed is harvested, but it cannot be discarded at will, otherwise it will easily cause secondary pollution after corruption. Therefore, it is urgent to find and establish a suitable collection and treatment process system to achieve the goal of comprehensive utilization of reeds and creating a beautiful environment.

Today I will introduce a good way to use reeds to produce molded pallets. Reed is a tall grass with well-developed rhizomes. 1-3 meters high, with more than 20 knots, rich in fiber. All these create favorable conditions for the production of molded pallets.

When producing molded reed pallet, firstly the recycled reeds need to be dried, and then the reed stalks should be collected to remove the moldy and corrupted stalks, as well as sand and gravel impurities. Then, the screened reed stalks are crushed to obtain reed stalk shavings; the sieve diameter of the crusher is selected to be 5-8mm. The reed stalk shavings are put into a dryer for drying, and the moisture content of the plant stalk after drying is less than 4.5%. Then put the reed stalk shavings and MDI glue into the glue mixing machine for mixing. The last step is molding in the pallet molding machine. According to the specifications and sizes of the molding mold, weigh an appropriate amount of reed shavings mixed with glue and pour them into the mold for molding. After holding the pressure for a period of time, the molded pallet can be taken out.

Using reeds to make molded pallets can achieve a strength close to that of wood shavings molded pallets. The processing cost is low in the whole processing process, and the quality control is stable and convenient, which greatly improves the processing quality. The molded pallet produced is stable in quality, low in price, and has good economic benefits.